+86-0523-18921730790
Modell: CUSTOM
Marke: OEM
Herkunftsort: China
Status: Neu
Inspektion Der Videofabrik: Unter der Voraussetzung
Mechanischer Prüfbericht: Unter der Voraussetzung
Marketing-Typ: Gewöhnliches Produkt
Garantiezeit Für Kernkomponenten: 3 Monate
Kernkomponenten: SPS, Motor, Motor
Garantiezeit: 3 Monate
Service Außerhalb Der Garantie: Technischer Video-Support, Kein Service, Ersatzteile
Wo Können Lokale Dienstleistungen Erbracht Werden (in Welchen Ländern Gibt Es Servicestellen In Übersee)?: keiner
Anwendbare Industrie: andere, Produktionsstätte
Ausstellungsraum (in Welchen Ländern Gibt Es Musterräume In Übersee): keiner
Place Of Origin: Jiangsu, China
Alloy Or Not: Is Alloy
Brand Name: Metalli
Temper: O - H112
Application: Heat Exchanger,Radiator,Industrial Fields,Etc.
Width: 12-1300 Mm
Grade: 4000 Series
Model Number: Aac 1002
Thickness: 0.05-0.2 Mm
Alloy Number: 4045,4343
Verpakung: Unsere exportierende Standardverpackung: PE-Schaum + Plastiktüte + Karton + Palette; PE-Schaum + Plastiktüte + Holzkiste.
Produktivität: 50000 per month
Transport: Ocean,Land,Air,BY Express
Ort Von Zukunft: Jiangsu, China
Unterstützung über: 50000 per month
Zertifikate : International Automotive Task Force
Hafen: ShangHai.China
Zahlungsart: L/C,T/T,PaypalL/C,D/A,D/P,T/T
Incoterm: FOBFOB
Produktbeschreibung der Aluminiumfolie zum Hartlöten unter kontrollierter Atmosphäre (Nocolok)
| 1. Aluminum alloy number | ||||||||||||||
| No. | Aluminum Alloy Number | |||||||||||||
| 1.1 | 4045,4343 | |||||||||||||
| 2. Product size and tolerance | ||||||||||||||
| No. | Specification | Size | Tolerance | |||||||||||
| 2.1 | Width (mm) | 12-1300 | min ±0.02,max ±1 | |||||||||||
| 2.2 | Thickness (mm) | 0.05-0.2 | min ±0.004,max ±0.01 | |||||||||||
| 3. Chemical composition for some typical alloys | ||||||||||||||
| No. |
Internal Alloy Number |
AA number | Chemical Composition (%) | |||||||||||
| Si | Fe | Cu | Mn | Mg | Zn | Ti | Zr | Bi | Others | Al | ||||
| Each | Total | |||||||||||||
| 3.1 | 1060 | 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | 0.03 | 99.6 | |||
| 3.2 | 1070 | 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | 0.04 | 0.03 | 0.03 | 99.7 | |||
| 3.3 | 1100 | 1100 | 0.95 | 0.05-0.2 | 0.05 | 0.1 | 0.05 | 0.15 | RE | |||||
| 3.4 | 3003 | 3003 | 0.6 | 0.7 | 0.05-0.2 | 1-1.5 | 0.05 | 0.1 | 0.05 | 0.15 | RE | |||
| 3.5 | 3005 | 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.25 | Cr 0.1 | 0.05 | 0.15 | RE | ||
| 3.6 | 4004 | 4004 | 9.0-10.5 | 0.8 | 0.25 | 0.1 | 1.0-2.0 | 0.2 | 0.05 | 0.15 | RE | |||
| 3.7 | 4045 | 4045 | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 0.1 | 0.05 | 0.15 | RE | |||
| 3.8 | 4047 | 4047 | 11.0-13.0 | 0.8 | 0.3 | 0.15 | 0.05 | 0.2 | 0.05 | 0.15 | RE | |||
| 3.9 | 4104 | 4104 | 9.0-10.5 | 0.8 | 0.25 | 0.1 | 1.0-2.0 | 0.2 | 0.05-0.2 | 0.05 | 0.15 | RE | ||
| 3.10 | 4343 | 4343 | 6.8-8.2 | 0.8 | 0.25 | 0.1 | 0.05 | 0.2 | 0.05 | 0.15 | RE | |||
| 3.11 | 4343A | 4343A | 6.8-8.2 | 0.6 | 0.1 | 0.1 | 0.02 | 0.1 | 0.05 | 0.15 | RE | |||
| 3.12 | 6060 | 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.15 | 0.1 | Cr 0.05 | 0.05 | 0.15 | RE | |
| 3.13 | 6061 | 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.25 | 0.15 | Cr 0.04-0.35 | 0.05 | 0.5 | RE | |
| 3.14 | 6063 | 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | Cr 0.1 | 0.05 | 0.15 | RE | |
| 3.15 | 6A02 | 6A02 | 0.5-1.2 | 0.5 | 0.2-0.6 | 0.1-0.35 | 0.45-0.9 | 0.2 | 0.15 | 0.05 | 0.15 | RE | ||
| 3.16 | 7072 | 7072 | 0.7 | 0.1 | 0.1 | 0.1 | 0.1 | 0.8-1.3 | 0.05 | 0.15 | RE | |||
| 3.17 | 8011 | 8011 | 0.5-0.9 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | 0.1 | 0.08 | Cr 0.05 | 0.05 | 0.15 | RE | |
| 3.18 | 4343+1%Zn | 4343+1%Zn | 9.0-11.0 | 0.8 | 0.25 | 0.1 | 0.05 | 0.7-1.3 | 0.05 | 0.15 | RE | |||
| 3.19 | 4045+1%Zn | 4045+1%Zn | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 1.7-1.3 | 0.05 | 0.15 | RE | |||
| 3.20 | 4A13 | 4343Mod | 8.9 | 0.6 | 0.2 | 0.1 | 0.08-0.2 | 0.2 | 0.15 | 0.05 | 0.15 | RE | ||
| 4. Mechanical properties for some typical alloys | ||||||||||||||
| No. | Alloy number |
Thick. (mm) |
Temper |
Yield Strength Rp0.2(Mpa). Min |
Tensile Strength Rm (Mpa) |
Elongation (%) A50,Min |
Homogenization treatment | Typical usage | ||||||
| 4.1 | 3003 | 0.08-0.15 | O | 35 | 95-135 | 8 | N | Fins | ||||||
| 4.2 | 3003 | 0.16-0.35 | O | 35 | 95-135 | 10 | N | Fins | ||||||
| 4.3 | 3003 | 0.15-0.3 | H12 | 90 | 120-175 | 0.5 | N | Fins | ||||||
| 4.4 | 3003 | 0.06-0.08 | H14 | 125 | 145-185 | 0.5 | N | Fins | ||||||
| 4.5 | 3003 | 0.081-0.3 | H14 | 125 | 145-200 | 0.5 | N | Fins | ||||||
| 4.6 | 3003 | 0.06-0.16 | H16 | 160 | 165-205 | 0.5 | N | Fins | ||||||
| 4.7 | 3003 | 0.2-0.3 | H24 | 125 | 145-205 | 6 | N | Fins | ||||||
| 4.8 | 3003-1 | 0.35-3.0 | O | 35 | 95-135 | 20 | Y | Plate | ||||||
| 4.9 | 3003-1 | 0.40-3.0 | H14 | 125 | 145-185 | 3 | Y | Plate | ||||||
| 4.10 | 3003-1 | 1.0-3.0 | H24 | 125 | 145-185 | 10 | Y | Plate | ||||||
| 4.11 | 6A02 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.12 | 6060 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.13 | 6063 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.14 | 4343 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.15 | 4343 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.16 | 4045 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.17 | 4045 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.18 | 4104 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.19 | 4104 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.20 | 4A13 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.21 | 4A13 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.22 | 4047 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.23 | 4047 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.24 | 3003 | 0.25-0.35 | H24 | 130 | 155-205 | 6 | N | Fins for air cooler | ||||||
| 4.25 | 3003 | 0.1-0.2 | H14 | 125 | 145-185 | 1 | N | Fins | ||||||
| 4.26 | 3003 | 0.1-0.3 | O | 35 | 95-135 | 10 | N | Fins | ||||||
| 4.27 | 3003 | 0.3-0.8 | H14 | 125 | 145-185 | 2 | Y | Plate | ||||||
| 4.28 | 3003 | 0.8-2.5 | H14 | 125 | 145-185 | 4 | Y | Plate | ||||||
| 4.29 | 3003 | 0.5-1.6 | O | 35 | 145-185 | 20 | Y | Plate | ||||||
| 4.30 | 3003-1 | 0.3-1.8 | O | 35 | 95-135 | 20 | Y | Band | ||||||
| 4.31 | 3003-1 | 0.5-4.0 | O | 35 | 95-135 | 25 | Y | Plate | ||||||
| 4.32 | 3005 Mod | 0.25-0.6 | H24 | 150 | 185-235 | 8 | N | Long life tube | ||||||
| 4.33 | 6060 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.34 | 6063 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.35 | 3005 | 0.8-4.5 | O | 40 | 80-120 | 20 | Y | Vacuum plate | ||||||
| 4.36 | 3005 | 0.6-4.5 | H22 | 110 | 145-195 | 15 | Y | Vacuum plate | ||||||
| 4.37 | 1100 | 0.2-0.3 | H24 | 90 | 115-155 | 3 | N | Fins for air cooler | ||||||
| 4.38 | 6A02 | 1.0-5.0 | O | ≤85 | ≤150 | 20 | Y/N | Plate | ||||||
| 5. Surface finish and other properties | ||||||||||||||
| No. | Item | Description | ||||||||||||
| 5.1 | Surface finish | a. The material shall be free from pinholes and tearing; b.The material shall be free waves and buckles; c. The slit edges must be free from burrs and shall be straight and parallel. | ||||||||||||
| 5.2 | Depth of Curvature | In any length or width of 1 meter of the material,the depth of arc shall not exceed 2 mm. | ||||||||||||
| 6. Packing,Shipping and others | ||||||||||||||
| No. | Item | Description | ||||||||||||
| 6.1 | Packing | To be packed in wooden boxes with card board and cutting with paper core in-between the coil max package weight 1500 kgs | ||||||||||||
| 6.2 | Inner and outer diameter | Inner diameter 100/150/200/250/300/400/500mm can be optional based on product spec. and quantity,max outer diameter shall not exceed 1700mm | ||||||||||||
| 6.3 | Rolled core material | Paper,aluminum,iron or none can be optional based on product specification or requirements | ||||||||||||
| 6.4 | Coil orientation | Coil orientation in clockwise direction and eye to sky,anticloclwise can be optional | ||||||||||||
| 6.5 | Packing way | Horizontal or vertical packing can be optional based on product specification and transfer safety | ||||||||||||
| 6.6 | Marking | Each box to be legibly marked with the name of the manufacturer or supplier, the alloy designation of material,condition,dimensions and weight | ||||||||||||
| 6.7 | Shipping tools | Ship goods by van to departune port then by sea to desitination port | ||||||||||||
| 6.8 | Quantity variation |
±10% variation with order quantity shall be acceptable |
||||||||||||
Produktgruppe : Strangpressprofile aus Aluminium > Aluminium Profil Heasinks
PE-Schaum + Plastiktüte + Karton + Palette;
PE-Schaum + Plastiktüte + Holzkiste.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now